User Tools

Site Tools


empty_kiosk

This is an old revision of the document!


Empty Kiosk Screen

An Empty Kiosk places the device into a state where no apps are visible at all. From the mobile user's point of view it seems there are no apps on the device at all. Every app is in fact still on the device albeit hidden from the user.

The system user can use this screen to create an empty Kiosk and then one by one, add any apps that are needed to be used on the device.

Get Current Visible Selection

This button sends a command to the device to retrieve all the apps the mobile user can currently see on the device. This is either in or out of kiosk mode.

Enable Kiosk Mode

This button will place the device into an empty kiosk (when first applied).

Below are screenshots of sending the command, which can be to the device, a policy or a group.

Disable Kiosk Mode

This button will disable the kiosk mode and return the device back to normal with all apps visible.

Get available Apps

This retrieves all possible app that are currently installed on the device and which could be added to an empty kiosk.

Add Selected Apps

Here we have the usual list with check ticks. The upper most check tick will select/deselect the entire list.

The system user can select any apps from this list to add to the empty kiosk. NB. Please ensure that an empty kiosk has been created first

Once the app list has been sent to the device, the currently visible apps list will update to reflect what the mobile user can currently see.

Remove Selected Apps

The system user can select apps from the list to remove from the kiosk.

empty_kiosk.1527595847.txt.gz · Last modified: 2018/05/29 13:10 (external edit)