Differences

This shows you the differences between two versions of the page.

--- calls_limits [2018/07/10 08:04]
devreach
+++ calls_limits [2018/07/10 21:42]
@@ Line 1: / Line 1: @@
-__**Calls limits Screen**__
-The system user can use this screen to set incoming/outgoing call limits on the device. The limits can be set for day, week and month. For example a device could have the following limits for incoming calls, 5, 10 and 30.
-This would mean the device could only accept a maximum of 5 calls in one day, 10 calls in any one week and 30 per month. Once any limit is reached the device will not accept the call.
-{{:calllimits.png|}}
-**__Set New Limits__**
-This will take the new limits entered by the system user in the new values fields and send them to the device; They will not be applied however. (This is done via the Enable button in Call Limit Status).
-{{:callnewvalues.png|}}
-**__Enable__**
-The system user can use this button to enforce the new limits on the device.
-**__Disable__**
-The system user can use this button to disable the new limits on the device so they no longer take effect.
-**__Reset Calls Count__**
-The system user can use this button to reset the calls count on the device. For example if the device has reveived 3 calls today, it would set the call count back to zero. This does not affect call limits.
-**__Are Limits Enabled__**
-This shows the current state of whether the limits are applied to the device. For example wether the system user has clicked Enable or Disable.
-NB. The above functionality is the same for both incoming and outgoing calls.

DevReach Wiki

User Tools

Site Tools

Differences

Page Tools